RGTH60TK65 650v 30a field stop trench igbt *1 pulse width limited by t jmax. operating junction temperature t j - 40 to +175 c storage temperature t stg - 55 to +175 c power dissipation t c = 25c p d 61 w t c = 100c p d 30 w 120 a pulsed collector current i cp *1 l outline v ces 650v to-3pfm i c(100c) 17a v ce(sat) (typ.) 1.6v @i c =30a p d 61w l features l inner circuit 1) low collector - emitter saturation voltage 2) high speed switching 3) low switching loss & soft switching 4) pb - free lead plating ; rohs compliant l packaging specifications l applications type packaging tube pfc reel size (mm) - ups tape width (mm) - power conditioner basic ordering unit (pcs) 450 ih packing code c11 marking RGTH60TK65 l absolute maximum ratings (at t c = 25c unless otherwise specified) parameter symbol value unit collector - emitter voltage v ces 650 v gate - emitter voltage v ges ? 30 v collector current t c = 25c i c 28 a t c = 100c i c 17 a (1) gate (2) collector (3) emitter (1) (2) (3) (1) (2) (3) 1/9 2016.01 - rev.a downloaded from: http:/// data s he et www.rohm.com ? 2016 rohm co., ltd. all rights reserved.
www.rohm.com ? 2016 rohm co., ltd. all rights reserved. data sheet RGTH60TK65 l thermal resistance l igbt electrical characteristics (at t j = 25c unless otherwise specified) v t j = 25c - 1.6 2.1 t j = 175c - 2.1 - v ce(sat) i c = 30a, v ge = 15v - ? 200 na gate - emitter threshold voltage v ge(th) v ce = 5v, i c = 21.0ma 4.5 5.5 6.5 v gate - emitter leakage current i ges v ge = ? 30v, v ce = 0v - - - v collector cut - off current i ces v ce = 650v, v ge = 0v - - 10 a collector - emitter breakdown voltage bv ces i c = 10a, v ge = 0v 650 conditions values unit min. typ. max. collector - emitter saturation voltage unit min. typ. max. thermal resistance igbt junction - case r (j-c) - - 2.43 c/w parameter symbol values parameter symbol 2/9 2016.01 - rev.a downloaded from: http:///
www.rohm.com ? 2016 rohm co., ltd. all rights reserved. data sheet RGTH60TK65 l igbt electrical characteristics (at t j = 25c unless otherwise specified) reverse bias safe operating area rbsoa i c = 120a, v cc = 520v full square - v p = 650v, v ge = 15v r g = 60, t j = 175c - 120 - fall time t f inductive load - 59 - ns rise time t r v ge = 15v, r g = 10 - 40 - turn - off delay time t d(off) t j = 175c turn - on delay time t d(on) i c = 30a, v cc = 400v - 27 - - 105 - fall time t f inductive load - 47 - turn - on delay time t d(on) i c = 30a, v cc = 400v - 27 - ns rise time t r v ge = 15v, r g = 10 - 40 - turn - off delay time t d(off) t j = 25c nc gate - emitter charge q ge i c = 30a - 15 - gate - collector charge q gc v ge = 15v - 20 - - 27 - total gate charge q g v ce = 300v - 58 - parameter symbol conditions values unit min. typ. max. pf output capacitance c oes v ge = 0v - 66 - reverse transfer capacitance c res f = 1mhz input capacitance c ies v ce = 30v - 1670 - 3/9 2016.01 - rev.a downloaded from: http:///
www.rohm.com ? 2016 rohm co., ltd. all rights reserved. data sheet RGTH60TK65 l electrical characteristic curves fig.2 collector current vs. case temperature collector current : i c [a] case temperature : t c [oc] fig.3 forward bias safe operating area collector current : i c [a] collector to emitter voltage : v ce [v] fig.4 reverse bias safe operating area collector current : i c [a] collector to emitter voltage : v ce [v] fig.1 power dissipation vs. case temperature power dissipation : p d [w] case temperature : t c [oc] 0 10 20 30 40 50 60 70 80 0 25 50 75 100 125 150 175 0 20 40 60 80 100 120 140 160 0 200 400 600 800 t j 175oc v ge =15v 0 5 10 15 20 25 30 35 0 25 50 75 100 125 150 175 t j 175oc v ge 15v 0.01 0.1 1 10 100 1000 1 10 100 1000 t c = 25oc single pulse 10 s 100 s 4/9 2016.01 - rev.a downloaded from: http:///
www.rohm.com ? 2016 rohm co., ltd. all rights reserved. data sheet RGTH60TK65 l electrical characteristic curves fig.5 typical output characteristics collector current : i c [a] collector to emitter voltage : v ce [v] fig.6 typical output characteristics collector current : i c [a] collector to emitter voltage : v ce [v] fig.7 typical transfer characteristics collector current : i c [a] gate to emitter voltage : v ge [v] fig.8 typical collector to emitter saturation voltage vs. junction temperature collector to emitter saturation voltage : v ce(sat) [v] junction temperature : t j [oc] 0 20 40 60 80 100 120 0 1 2 3 4 5 t j = 175oc v ge = 20v v ge = 12v v ge = 10v v ge = 8v v ge = 15v 0 20 40 60 80 100 120 0 1 2 3 4 5 t j = 25oc v ge = 20v v ge = 15v v ge = 12v v ge = 10v v ge = 8v 0 10 20 30 40 50 60 0 2 4 6 8 10 12 v ce = 10v t j = 25oc t j = 175oc 0 1 2 3 4 25 50 75 100 125 150 175 i c = 60a i c = 15a i c = 30a v ge = 15v 5/9 2016.01 - rev.a downloaded from: http:///
www.rohm.com ? 2016 rohm co., ltd. all rights reserved. data sheet RGTH60TK65 l electrical characteristic curves collector to emitter saturation voltage : v ce(sat) [v] gate to emitter voltage : v ge [v] collector to emitter saturation voltage : v ce(sat) [v] gate to emitter voltage : v ge [v] switching time [ns] collector current : i c [a] fig.12 typical switching time vs. gate resistance switching time [ns] gate resistance : r g [ ] fig.9 typical collector to emitter saturation volta ge vs. gate to emitter voltage fig.10 typical collector to emitter saturation volt age vs. gate to emitter voltage fig.11 typical switching time vs. collector current 0 5 10 15 20 5 10 15 20 t j = 25oc i c = 60a i c = 15a i c = 30a 0 5 10 15 20 5 10 15 20 t j = 175oc i c = 60a i c = 15a i c = 30a 10 100 1000 0 10 20 30 40 50 60 t f v cc =400v, v ge =15v r g =10 , t j =175oc inductive oad t d(off) t d(on) t r 10 100 1000 0 10 20 30 40 50 t f t d(off) t d(on) t r v cc =400v, i c =30a v ge =15v , t j =175oc inductive oad 6/9 2016.01 - rev.a downloaded from: http:///
www.rohm.com ? 2016 rohm co., ltd. all rights reserved. data sheet RGTH60TK65 l electrical characteristic curves fig.13 typical switching energy losses vs. collector current switching energy losses [mj] collector current : i c [a] fig.14 typical switching energy losses vs. gate resistance switching energy losses [mj] gate resistance : r g [ ] fig.15 typical capacitance vs. collector to emitter voltage capacitance [pf] collector to emitter voltage : v ce [v] fig.16 typical gate charge gate to emitter voltage : v ge [v] gate charge : q g [nc] 0.01 0.1 1 10 0 10 20 30 40 50 60 e off v cc =400v, v ge =15v r g =10 , t j =175oc inductive oad e on 1 10 100 1000 10000 0.01 0.1 1 10 100 cies f=1mhz v ge =0v t j =25oc coes cres 0.01 0.1 1 10 0 10 20 30 40 50 e off e on v cc =400v, i c =30a v ge =15v , t j =175oc inductive oad 0 5 10 15 0 10 20 30 40 50 60 v cc =300v i c =30a t j =25oc 7/9 2016.01 - rev.a downloaded from: http:///
www.rohm.com ? 2016 rohm co., ltd. all rights reserved. data sheet RGTH60TK65 l electrical characteristic curves 0.01 0.1 1 10 0.0001 0.001 0.01 0.1 1 10 100 d= 0.5 0.2 0.1 0.01 0.02 0.05 single pulse fig.17 igbt transient thermal impedance transient thermal impedance : z thjc [oc/w] pulse width : t1[s] t1 t2 p dm duty=t1/t2 peak t j =p dm z thjc + t c 8/9 2016.01 - rev.a downloaded from: http:///
www.rohm.com ? 2016 rohm co., ltd. all rights reserved. data sheet RGTH60TK65 l inductive load switching circuit and waveform t r t off 10% 90% t f t d(on) t d(off) gate drive time v ce(sat) 10% 90% t on v ge i c v ce e on 10% e o ff vg d.u.t. fig.18 inductive load circuit fig.19 inductive load waveform 9/9 2016.01 - rev.a downloaded from: http:///
r1102 a www.rohm.com ? 2016 rohm co., ltd. all rights reserved. notice ro hm cu stome r s upport sy s tem h ttp :// www.r oh m .co m/ co n tact / thank you for your accessing to rohm product informations. more detail product informations and catalogs are available, please contact us. no tes the information contained herein is subject to change without notice. before you use our products, pl ease contact our sales representative and verify th e la tes t specifica - tion s : alt hou gh rohm is contin uous ly wor ki ng to im pr ove p ro du ct r eli a bility and qualit y, semicon - du c tor s c an bre a k d ow n and ma lf un ct io n du e to var io us f ac to rs. th e re fore, in or der to prevent pe r so nal in ju ry or fi re ar isi ng f ro m fa ilur e, please ta ke sa f ety mea s ur es su ch as com plyin g wi th th e de r at in g ch ara ct er ist ic s, impl e menting redundant and f ir e preve nt ion designs, and u tilizin g ba ck up s a nd f ail - sa fe p ro ce du re s. ro hm shall have no responsibility for any damages arising out of the use of our poducts b ey ond the rating specified by rohm. examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the products. the peripheral conditions must be taken into account when designing circuits for mass production. the technical information specified herein is intended only to show the typical functions of and examples of application circuits for the products. rohm does not gr ant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by rohm or any other parties. rohm shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. the products are intended for use in general electronic equipment (i.e. av/oa devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. the products specified in this document are not designed to be radiation tolerant. for use of our products in applications requiring a high degree of reliability (as ex emplified bel ow), please contact and consult with a rohm representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. do not use our products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. rohm shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. rohm has used reasonable care to ensur the accuracy of the information contained in this document. however, rohm does not warrants that such information is error-free, and rohm shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. please use the products in accordance with any applicable environmental laws and regulations, such as the rohs directive. for more details, including rohs compatibility, please contact a rohm sales office. rohm shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. when providing our products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the us export administration regulations and the foreign exchange and foreign trade act. this document, in part or in whole, may not be reprinted or reproduced without prior consent of rohm. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10)11) 12) 13) 14) downloaded from: http:///
|
